WWZMDiB LCR-TC1 Multi-Function Capacitance Resistance ESR Tester 1.8″ Full Color Display Transistor Meter for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET


Price: $19.99
(as of May 23, 2024 22:01:49 UTC – Details)



WWZMDiB LCR-TC1 Multi-Function Capacitance Resistance ESR Tester 1.8″ Full Color Display Transistor Meter for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET

💎【LCR-TC1 Multi-Function Capacitance Resistance ESR Tester】:Can measure three tube, two tube, resistance, capacitance, inductance, thyristor, field effect tube, voltage regulator, double two tube, light emitting two tube, infrared decoding.
🥇Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.
🥈After detection, align the infrared remote control with the “IR” light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
🥉One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector.

【Specification】:
– Display: 1.8 inch TFT Screen, Color Screen
– Diode Range: less than 4.5V
– Zener Diode:Transistor Detect Area: 0.01-4.5V
– Zener Diode Detect Area: 0.01-30V
– Triac Range: IGT less than 6mA
– Capacitance: 25pF-100mF
– Resistor: 0.01-50MΩ
– Inductance: 0.01mH-20H
– Power Voltage: 3.7V
– Power: Built-in Rechargeable Lithium Battery
Package Dimensions ‏ : ‎ 3.98 x 3.74 x 1.77 inches; 4.16 ounces
Item model number ‏ : ‎ LCR-TC1
Date First Available ‏ : ‎ November 8, 2022
Manufacturer ‏ : ‎ WWZMDiB
ASIN ‏ : ‎ B0BLSKW861
Country of Origin ‏ : ‎ China

💎【LCR-TC1 Multi-Function Capacitance Resistance ESR Tester】:Can measure three tube, two tube, resistance, capacitance, inductance, thyristor, field effect tube, voltage regulator, double two tube, light emitting two tube, infrared decoding.
🥇Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly.
🥈After detection, align the infrared remote control with the “IR” light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.
🥉One button operation, automatically detect and shutdown, and you can also press the multi-functional button to close the detector.

Scroll to Top